With a little time and some basic materials, you can make a decorated bucket to suit any decor. These buckets can be used to store toys, magazines, flipflops, DVDs...you get the picture. And, depending on the materials you use, your bucket can be customized for any decor. They are just as great for kid's rooms as for adults, and make a unique containers for a customized basket gift--just fill with assorted goodies.
The galvanized buckets that form the base of this project are available in a wide range of sizes, from tiny to large. Small buckets can be used to hold office or craft essentials, while larger buckets can hold toys, and magazines. The buckets can also be used for plants (see tips below).
There are few set rules for this project, and a variety of ways it can be done.
Most importantly, it is not necessary to be overly precise!
Here are my instructions:
Materials:
1) Galvanized pail: Available in various sizes, from home supply or garden supply stores. I purchased mine online at www.jamaligarden.com.
2) Decoupage medium: Either Aleene's or ModgePodge, both sold in craft stores. You can use either glossy or matte, depending on the finish desired.
3) Foam brushes: Available at craft stores.
4) Assorted paper and ribbon: Available at various locations. I used a combination of wrapping and scrapbooking paper from www.paper-source.com (for the animal print paper), and my local grocery store. I used an assortment of packaged craft ribbon from Costco (not sure if this is still available).
To make the bucket:
First, make sure the bucket is clean. Working somewhat quickly, apply decoupage medium with foam brush, tear or cut paper to fit and apply in desired pattern. I usually apply the decoupage medium onto the bucket, apply the paper on top, then immediately apply another coat. Work around the bucket, layering pieces to form a collage pattern. It may be easier to work one side, then let it dry before working the other. You can also add a ribbon embellishment if you like--I added ribbon just under the top rim, and along the bottom edge.
If you want more of a single design, and less of a collage, you must be more precise when cutting and applying the paper. You will want to cut it to measure the bucket, and overlap any edges slightly to avoid a "seam". Keep in mind that the bucket tapers at the bottom and may cause the paper to crease. It may be easier to apply the paper in two smaller pieces rather than trying to wrap the whole piece around the bucket.
When the bucket is covered, and the decoupage medium is dry, apply one more coat over the entire bucket. If you like, you can add ribbons to the handle.
Another alternative is to use fabric scraps instead of paper to decorate the bucket. You can still use decoupage medium with fabric.
Have fun!!
Recent Comments